Tx Settings Menu - Canon MultiPASS C530 Fax Manual
Color bubble jet printer fax scanner copier stand-alone fax
Hide thumbs
Also See for MultiPASS C530:
- User manual (383 pages) ,
- Software manual (338 pages) ,
- Service manual (243 pages)
Table of Contents
Advertisement
TX Settings Menu
Name
Description
ECM TX
Enable/disable Error Correction Mode (ECM) during transmission.
MID PAUSE SET
Select the length of the pause entered between numbers with the Redial/Pause button.
AUTO REDIAL
Select whether the MultiPASS redials if the other party's line is busy on the first attempt.
REDIAL TIMES
Select the number of redial attempts. (Even if the MultiPASS is set to redial several times,
it will redial only once if there is no tone or there is a ring back tone during the first
attempt.)
REDIAL INTERVAL
Select the period of time between redial attempts.
Enable/disable the TIME OUT feature.
TIME OUT
ON: Scanning starts 10 seconds after the last number is entered when sending to
multiple destinations (5 seconds if only sending to one destination).
OFF: After entering the last number, press the Start/Scan button, or else the MultiPASS
will return to standby mode after 60 seconds.
Default settings are shown in bold type.
Chapter 7
Settings
ON/OFF
02 SEC (01 to 15)
ON/OFF
02 TIMES (01 to 10)
02 MIN. (02 to 99)
ON/OFF
Summary of Settings
7-13
Advertisement
Table of Contents
