Changing The Fax Settings (Items Specifi Ed Using The [Menu] Button); Setting Procedure For Sending; Setting Items For The Send Settings - Canon 3556B001AA Basic Operation Manual

Changing the Fax Settings (Items Specifi ed Using the [Menu] Button)

Change the settings for sending and receiving faxes.
For details on the procedure for setting specifi cations or the
setting items, see the next items.
"Setting procedure for Sending" (→P.6-21)
"Setting Items for the Send Settings" (→P.6-21)
"Setting Procedure for Receiving" (→P.6-23)
"Setting Items for the Receive Settings" (→P.6-24)
"System settings procedure" (→P.6-25)
"Setting Items for the System Settings" (→P.6-26)

Setting procedure for Sending

Specify the settings for sending using the following procedure.
This section describes the procedure for changing the setting
for "ECM Sending" as an example.
Keys to be used for this operation
Menu
1
Press [ ] (Menu).
2
Select <Send/Receive Settings> with [
and then press [OK].
Menu
Common Settings
Copy Settings
Memory Media Settin
Send/Receive Setting
3
Select <Fax Settings> with [
press [OK].
Send/Receive Settings
Common Settings
Fax Settings
OK
] or [ ],
...
] or [ ], and then
4
Select <Send Settings> with [
press [OK].
Fax Settings
Basic Settings
Send Settings
Receive Settings
Fax Setup Guide
5
Select <ECM Sending> with [
press [OK].
Send Settings
ECM Sending
Pause Time
Auto Redial
Check Dial Tone Befo...
6
Select <Off > or <On> with [
press [OK].
ECM Sending
Off
On
* When <Apply> appears in the screen, you need to select <Apply>
and press [OK] after specifying the setting.
7
Press [ ] (Menu) to close the menu screen.
The setting is complete.

Setting Items for the Send Settings

The send settings include the following items.
Send/Receive Settings
"Register Username" (→P.6-22)
Common
Send Settings "Change Defaults" (→P.6-22)
Settings
"Sender ID" (→P.6-22)
"Fax No." (→P.6-22)
Basic Settings "Select Line Type" (→P.6-22)
"Off hook Alarm" (→P.6-22)
"ECM Sending" (→P.6-22)
Fax Settings
"Pause Time" (→P.6-23)
Send Settings
"Auto Redial" (→P.6-23)
"Check Dial Tone Before Sending" (→P.6-23)
] or [ ], and then
] or [ ], and then
] or [ ], and then
6-21