Setting Fax/Tel Mode
Your MultiPASS is factory-set to Fax/Tel Mode. If you have not changed the receive mode to FAX
ONLY MODE or DRPD, simply follow this procedure:
1. Press
Receive Mode
I
If you have previously set FAX ONLY MODE or DRPD in the RX MODE setting of the RX
SETTINGS menu, you will have to change the mode back to FAX/TEL AUTO SW. Follow this
procedure:
1. Press
Function
2. Press
01
Data Registration
Chapter 5
to select Fax/Tel Mode.
Receive Mode
Fax/Tel Mode
After a few seconds, the LCD display changes to the following display:
Ex:
12/27
FaxTel
.
Function
.
Data Registration
DATA REGSTRATION
Receiving Faxes
5-4