Redialing When the Line Is Busy
There are two methods of redialing: manual redialing and automatic redialing.
Manual Redialing
Press the
(This also starts redialing regardless of whether automatic redialing is enabled.)
Canceling Manual Redialing
To cancel manual redialing, press the
Automatic Redialing
When you are sending using memory sending and the other party's line is busy, the unit waits a
specified time and then dials the same number again. You can set the MultiPASS to redial several
times if the previous attempts failed because the line was busy. This feature is called automatic
redialing.
After the initial dial attempt, the default setting is to wait two minutes and try to dial again. If the
second attempt fails because the line was busy, the unit will again wait for two minutes and make
a final attempt to complete the call. (Even if the MultiPASS is set to redial several times, it will
redial only once if there is no tone or there is a ring back tone during the first attempt.)
Chapter 4
button to dial the last number you dialed with the numeric buttons.
Redial/Pause
button.
Stop
Sending Faxes
4-21