Setting The Receive Mode; Receiving Faxes And Phone Calls Automatically: Faxtel Mode; Setting The Options For Faxtel Mode - Canon FaxPhone L380 Quick Reference Manual

Setting the Receive Mode

Set the machine receive mode as follows:
1
Open One-Touch Speed Dial panel
The LCD display shows the current receive mode setting.
2
If you want to change the receive mode, press [Receive Mode] repeatedly until the mode you want
appears
Each time you press [Receive Mode], the receive mode changes in the following order:
FaxOnly
Receiving Faxes and Phone Calls Automatically: FaxTel
Mode
Set this mode if you want your machine to automatically switch between voice and fax calls.
You can control precisely how your machine handles incoming calls by adjusting the settings described
below.

Setting the Options for FaxTel Mode

When you select FaxTel Mode from the Menu, you can also set the following options.
RING START TIME
When a call comes in, the machine checks to see if it is a person wishing to speak to you or a fax machine trying to
send a document. If your machine does not have enough time to detect the fax tone, it assumes the call is from a
telephone. Use the <RING START TIME> setting to increase the time the machine takes to check whether a call is
from a fax machine or a telephone. You can select a time between 0 and 30 seconds; the default is 8 seconds.
F/T RING TIME
When your machine is set to receive both fax and telephone calls automatically, the telephone rings to alert you to
8
pick up the handset if the call is from a person. If you do not pick up the handset within a certain amount of time, the
telephone stops ringing. Use this option to change the number of times the machine rings, from 10 to 60 seconds.
The default is 22 seconds.
8-2
Different Ways to Receive a Fax
press [Receive Mode].
press [OK].
Manual AnsMode FaxTel FaxOnly ...