Janome JR3000 Series Operation Manual page 70

Condition Data Dispensing Conditions
MENU [Dispense Condition]
TP
Number Entry
[Return Type]
[Z Return Height]
[XY Return Dist.]
[Return Line Speed]
[Wait Time Aft. Retrn]
1. Press the MENU key on the settings screen of a given point, select [Dispense Condition] and
enter the condition number.
Enter and set the "dispensing return movement" you want. The display returns to the dispensing
condition setting screen.
2. After selecting [Z Return Height], [XY Return Dist.], [Return Line Speed] or [Wait Time Aft. Retrn],
each entry screen appears accordingly. Enter and set the values you want to modify. The display
returns to the Dispense Condition settings screen.
3. On the settings screen for the point for which you want to set the dispensing condition (the point
you want to prevent stringing at for the end of the line dispensing, such as a Start of Line Dispense
Point) select [Condition Number] (move the cursor (highlight bar) to a blank line on the point setting
screen to display the settable point jobs and condition data).
4. The dispensing condition number entry screen is displayed.
Enter the dispensing condition number entered in 1. If you press the F3 (LIST) key to display a
list of registered dispensing condition numbers, you can also select the number you want to set
from this list.
NOTE
With the following procedure you can register dispensing conditions and also set them to points.
Select [Condition Number] from the point setting screen, and when the dispensing condition
number you want to set has been entered, press the F4 (VIEW) key to show the information for
that number.
You can select the item you want to edit and also modify the information here.
Return movements are executed at [End of Line Dispense] points, and/or dispensing end positions.
Dispense Conditions in Individual Program Settings
[Program]  [Individual Program Settings]  [Individual Data]  [Dispense Condition]
PC
 [Hight Z Retracting]
[Distance of XY Retracting]
[Up Speed]
[Wait Time at Up]
Dispensing Specifications
The dispensing operation for which
you want to prevent liquid stringing at
the End of Line Dispensing
Start of Line Dispense
(Point Set with
Dispense Condition)
69
Stringing point
End of Line
Dispense
Desktop Robot JR3000