Janome JR3000 Series Operation Manual page 47

Circumference Angle: -90°
Start of Circle Dispense
+X
If you are using a PC (JR C-Points II) to register points, click the icons below to add the corresponding
point to the program.
•
: Start of Line Dispense
•
: Line Passing
•
: End of Line Dispense
•
: CP Arc Point
In order to set point types other than the ones shown above, change the point type of the point you
have added. Click the point type cell to display the "" mark on the right of the cell. Click this mark to
display the point types in a pull-down menu. Select and set the point type that you want to set.
Dispensing Specifications
Makes a PTP movement to the next point
Center of Circle
Dispense
+Y
46
Makes a PTP movement to the next point
Circumference Angle: 180°
Desktop Robot JR3000