Bosch EasyDrill 12 Original Instructions Manual page 14

14 | English
Hold the power tool securely. When tightening and
u
loosening screws be prepared for temporarily high torque
reactions.
Protect the power tool against heat, e.g.
against continuous intense sunlight, fire,
water, and moisture. There is a risk of explo-
sion.
Before any work on the power tool (e.g. maintenance,
u
tool change, etc.) as well as during transport and stor-
age, set the rotational direction switch to the middle
position. There is risk of injury from unintentionally
pressing the on/off switch.
Safety instructions for chargers
This charger is not intended for
u
use by children or persons with
physical, sensory or mental limita-
tions or a lack of experience or
knowledge. This charger can be
used by children aged 8 or older
and by persons who have physical,
sensory or mental limitations or a
lack of experience or knowledge if
a person responsible for their
safety supervises them or has in-
structed them in the safe opera-
tion of the charger and they under-
stand the associated dangers. Oth-
erwise, there is a risk of operating er-
rors and injuries.
Supervise children during use,
u
cleaning and maintenance. This will
ensure that children do not play with
the charger.
Do not expose the charger to rain or wet condi-
tions. Water entering a power tool will increase the risk of
electric shock.
Charge the power tool only with the supplied charger.
u
Keep the charger clean. Dirt poses a risk of electric
u
shock.
Always check the charger, cable and plug before use.
u
Stop using the charger if you discover any damage. Do
not open the charger yourself, and have it repaired
only by a qualified specialist using only original re-
1 609 92A 6DD | (05.08.2021)
placement parts. Damaged chargers, cables and plugs
increase the risk of electric shock.
Do not operate the charger on an easily ignited sur-
u
face (e.g. paper, textiles, etc.) or in a flammable envir-
onment. There is a risk of fire due to the charger heating
up during operation.
Products sold in GB only:
Your product is fitted with an BS 1363/A approved electric
plug with internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an au-
thorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Product Description and
Specifications
fire and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended use
The power tool is intended for driving and loosening screws
and for drilling in wood, metal and plastic.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Keyless chuck
(2) Clockwise rotational direction indicator
(3) Anti-clockwise rotational direction indicator
(4) Rotational direction switch
(5) "PowerLight"
(6) Battery charge indicator
(7) On/off switch
(8) Handle (insulated gripping surface)
(9) Charging connector
(10) Socket for charging connector
(11) Charger
Technical Data
Cordless Drill/Driver
Article number
Rated voltage
Read all the safety and
general instructions. Fail-
ure to observe the safety
and general instructions
may result in electric shock,
EasyDrill 12
3 603 JB3 0..
V= 12
Bosch Power Tools