Table of Contents
Advertisement
Table 6-4 Switch Configuration: VLAN Configuration
L
D
AB E L
E S C R I P T I O N
Control
Select Don't Touch to set the switch not to add VLAN information to the outgoing
frames.
Select Remove Tags to set the switch to remove VLAN tags from frames before
transmitting.
Select Add Tag (for all frames) to set the switch to add VLAN information to
outgoing frames.
Select Add Tag (for high priority frames) to set the switch to add VLAN
information to outgoing frames with the high priority setting.
Apply
Click Apply to save the settings.
6.5.1.
Changing the VLAN Mode
Follow the steps below to change the VLAN mode on the switch.
Click Switch Configuration > VLAN Configuration.
1.
Under VLAN Ability, select Port-based VLAN or 802.1Q VLAN.
2.
A warning screen displays. Click OK to set the VLAN mode and close this screen.
3.
Figure 6-7 Switch Configuration: VLAN Configuration: Mode Change Warning
In the VLAN Configuration screen, click Apply.
4.
When the VLAN mode change is complete, a screen displays as shown. Click OK to
5.
close the screen.
Figure 6-8 Switch Configuration: VLAN Configuration: Apply
The Port-based VLAN Configuration or 802.1Q VLAN Configuration tab shows.
6.5.2.
Port-Based VLAN Configuration
When you select Port-based VLAN in the VLAN Configuration screen and click Apply, the
Port-Based VLAN Configuration screen displays. Use this screen to set port-based VLANs.
Smart Ethernet Switch Series User's Manual
38
Advertisement
Table of Contents
