Table of Contents
Advertisement
6.2. Port Configuration
Set the port settings in the Port Configuration screen. Click Switch Configuration > Port
Configuration to display the screen.
To change the port settings in this screen, right-click and select the options.
Figure 6-2 Switch Configuration: Port Configuration
The following table describes the labels in this screen.
Table 6-2 Switch Configuration: Port Configuration
L
D
AB E L
E S C R I P T I O N
Port
This field displays the port number.
Enabled
This field displays whether the port is activated (Yes) or deactivated (No).
Right-click on a port and click Enabled and an option to activate or deactivate
the port.
RX Bandwidth
This field displays the bandwidth allowed for receiving traffic.
Right-click on a port and click RX Bandwidth to restrict the receiving bandwidth.
Select No Limit if you want to use the port's total bandwidth for receiving traffic.
TX Bandwidth
This field displays the bandwidth allowed for transmitting traffic.
Right-click on a port and click TX Bandwidth to restrict the transmission
bandwidth. Select No Limit if you want to use the port's total bandwidth for
transmitting traffic.
Advertising
This field displays the port speed and duplex mode.
Speed
Right-click on a port and select Advertising Speed to configure the port speed
and duplex mode.
Smart Ethernet Switch Series User's Manual
32
Advertisement
Table of Contents
