Table 4-2 Network: Switch Selection: Set
L
D
AB E L
E S C R I P T I O N
NOTE: This does NOT change the hardware MAC address on the switch.
Authentication
Accept the default or enter the security key for the RMT to access the switch for
Key
management.
OK
Click OK to save the settings in the RMT. You can view the switch information in the
Switch Database screen (see Figure 4-3).
Cancel
Click Cancel to discard all changes and close this screen.
4.2. Switch Database
You can view the information of the switch(es) you added to the database in the Switch
Database screen. Click Network > Switch Database to display the screen.
Figure 4-3 Network: Switch Database
The following table describes the labels in this screen.
Table 4-3 Network: Switch Database
L
AB E L
Switch Name
MAC Address
D
E S C R I P T I O N
This field displays a descriptive name for the switch.
This field displays the MAC address of the switch.
Smart Ethernet Switch Series User's Manual
23