Chapter 2.
Connection
2.1. Package Content
1 x switch
•
1 x power cord
•
1 x rack mount kit (optional)
•
4 x rubber feet (for desktop mounting)
•
1 x CD (user manual)
•
1 x QIG
•
2.2. Safety Warnings
The length of exposed (bare) power wire should not exceed 7mm.
•
Do not use this product near water, for example, in a wet basement.
•
Only a qualified technician should service or disassemble this device.
•
2.3. Hardware Installation
The smart switch series can be rack mountable or set on a desk.
2.3.1.
Desktop Mounting
For setting the smart switch on a desk or a flat surface, attached the four rubber feet to the
four corners of the smart switch first.
2.3.2.
Rack Mounting
If you want to install the smart switch in a 19" rack cabinet, use the included rack mount kit to
attach the ears to the smart switch with the screws provided.
When stacking the switch with other devices, leave space between devices to
2.4. Hardware Connection
This section describes the Ethernet ports and the power connection. Port connections are on
the front panel.
Hardware Installation and
allow airflow.
Do NOT block the ventilating holes.
Smart Ethernet Switch Series User's Manual
9