Table of Contents
Advertisement
Chapter 3.
Tool
3.1. Overview
The Remote Management Tool (RMT) allows you to configure the switch from a remote
location on the network without directly connecting a computer to the switch. If you have more
than one switch on the network, you can maintain multiple switches using the RMT.
The RMT uses a unique RRCP protocol that allows you to access and manage the switch
through the Ethernet network. This provides management security as the switch is not
manageable over the Internet.
You can configure advanced features (such as VLAN, trunking, port mirroring, etc.) using the
RMT. You can also back up, restore or reset the smart switch's configuration.
The RMT screens are best view with a screen resolution of 1024 x 768 pixels or
3.2. Installation Requirement
Following are the minimum requirements for your computer to install the RMT.
Pentium compatible processor
•
32 MB of RAM
•
Windows 98 SE (Second Edition), Windows ME, Windows NT4.0 (with service pack 6),
•
Windows 2000 or Windows XP
3.3. Installing the RMT
Follow the steps below to install the RMT on your computer.
Insert the included CD into your CD-ROM drive. The CD should start running
1.
automatically. Otherwise, search and double-click "Autorun.exe".
The AutoPlay Menu screen displays. Click Install RMT Utility.
2.
The Remote Management
higher.
Smart Ethernet Switch Series User's Manual
13
Advertisement
Table of Contents
