Table of Contents
Advertisement
Figure 6-5 Switch Configuration: QoS Configuration
The following table describes the labels in this screen.
Table 6-3 Switch Configuration: QoS Configuration
L
D
AB E L
E S C R I P T I O N
802.1p
Select Enabled to set the switch to prioritize VLAN tagged packets. VLAN tagged
VLAN
packets with priority levels 0 through 3 are treated as high priority. Priority levels 4
Priority
through 7 are treated as low priority.
Select Disabled to set the switch not to prioritize VLAN tagged packets.
High/Low
Select 4:1, 8:1 or 16:1 to set the switch to assign the selected ratio of the bandwidth for
Priority
transmitting high and low priority packets respectively.
Ratio
Select Disabled to disable this feature.
Port
This list displays the priority of the port.
Priority
To set the priority of the ports, right-click and select Low Priority or High Priority.
Port
This field displays the port number.
Priority
This field displays the priority level (High Priority or Low Priority) of the port.
If a port is set to high priority, it means all traffic to the port is prioritizes and processed
first.
Apply
Click Apply to save the changes in the RMT.
6.4. Introduction to VLAN
Virtual LANs are logical grouping of devices on different network segments and allows the
Smart Ethernet Switch Series User's Manual
35
Advertisement
Table of Contents
