Table 4-1 Network: Switch Selection
L
D
AB E L
E S C R I P T I O N
MAC Address
This field displays the MAC address of the switch in six pairs of hexadecimal
notation.
Chip ID
This field displays the hardware number of the switch.
Vendor ID
This field displays the ID of the switch manufacturer.
Discovered
This table displays the connection information to the switch(es).
Switch Links
Uplink MAC
This field displays the MAC address of the uplink port on the switch.
Address
Uplink Port
This field displays the uplink port number.
Downlink MAC
This field displays the MAC address of the connected downlink port.
Address
Downlink Port
This field displays the connected Ethernet port number.
4.1.1.
Adding a Switch to the Database
Follow the steps below to add a switch to the database.
Click Network > Switch Selection.
1.
In the Discovered Switches table, right-click on an entry and select Add to Switch
2.
Database.
A Set Switch Information screen displays.
3.
Figure 4-2 Network: Switch Selection: Set
The following table describes the labels in this screen.
Table 4-2 Network: Switch Selection: Set
L
D
AB E L
E S C R I P T I O N
Switch Name
Enter a descriptive name for the switch.
MAC Address
This field displays the MAC address of the switch. You may change the MAC address
here.
Smart Ethernet Switch Series User's Manual
22