Bushnell Trail Scout 11-9833 Instruction Manual page 9

NOTE (Models 119935/119905 Only) : THE LASER POINTER IS ACTIVATED IN THE SET- UP MODE. DO NOT PERMIT
THE LASER POINTER TO BE DIRECTED TOWARD ANYONE'S EYES TO AVOID POTENTIAL EYE INJURY.
1. K1 - Mode Switch (OFF / SETUP/ ON) :
a) Power ON (UP position): Set K1 to ON position, The LCD display will show "BUSHNELL"
for about 2 seconds.
EVENt nn
iMAGE nn
b) SETUP Mode [move switch K1 from UP (ON) position to center position]:
Press Up or Down buttons to scroll through choices of DAtE, tiME, NAME and
PASSWORD to modify or set these functions. Refer to the next two pages for more details.
c) Power OFF: Set K1 to "Off ", the Trail Scout will be OFF.
For mounting directions, please refer to the manual section titled "Using The Trail Scout" .
Trail Scout 2007 Models 119833+19 9
Before beginning the setup, insert 4 "D" size alkaline
batteries as indicated inside the battery compartment.
The LCD will rotate through the DAtE\tiME\EVENt&iMAGE displays
when pressing the Up and Down keys.
SETUp GUIDE
9
5/29/07 11:08:32 PM