Bushnell Trail Scout 11-9833 Instruction Manual page 10

Setup Guide (cont.)
(1) SET DATE: When the LCD shows the date, press the ENtER key to modify the date.
Set Date
09/18/04
(2) SET TIME: When the LCD shows the time, press the ENtER key to modify the time.
Set time
06: 30 PM
(3) SET NAME: When the LCD shows current name, press ENtER key to modify the
name display. Press Up or Down button to select one character from "A" to "Z",
MY NAME
"0" to "9", "_" , then Press ENtER to confirm, the cursor will move to next character.
555_1234
There are 2 lines of 8 characters each for your use. From Set Name, press the Down
button to change the password.
(4) SET PASSWORD:
Password
When the LCD shows [Password Set], press the ENtER key to set the password.
Set
10
Trail Scout 2007 Models 119833+110 10
Press Up or Down button to select 1-12 then press the ENtER button to
confirm the two digit month. The cursor will then move to the day.
Press Up or Down button to select 1-31 then press ENtER to confirm the two
digit day. Then the cursor will move to the year.
Press Up or Down button to select 0-99,then press ENtER to confirm the two
digit year. From Set Date, press the Down button to set the time.
Note: See "Other Setup Notes" for details on the moon phase
stamp feature, which is linked to the date you set here.
Press Up or Down button to select 1-12, then press ENtER to confirm the two
digit hour. Then the cursor will move to the minute.
Press Up or Down button to select 0-59, then press ENtER to confirm the two
digit minute. From SEt tiME, press the Down button to set the name.
5/29/07 11:08:32 PM