Three-Axis Proportional And User Switch; Three-Axis Switch And User Switch; Sip And Puff Device And User Switch - Sunrise Medical QUICKIE OMNI2 Instructions For Use Manual

2.9 Three-Axis Proportional and User Switch, (Fig. 2.4).
Typical applications are head control mechanisms fitted with a
joystick.
The device comprises of 4 direction switches and one User
Switch, connected to the OMNI2 via the 9-way D-type
connector. In addition, a normally-closed User Switch should
be connected to the OMNI2 via the 3.5mm / 1/8" jack socket.
This switch, although functionally identical to the Fifth Switch
input on the 9-way D-type connector, is required to provide a
fail-safe emergency-stop system.
The device comprises of a PG Drives Technology or Flightlink-
type inductive joystick connected to the OMNI2 via the 9-way
D-type connector. In addition, a User Switch is required and
connects to the OMNI2 via the 3.5mm/1/8" jack socket.
8
2.10 Three-Axis Switch and User Switch, (Fig. 2.5).
Typical applications are head control systems.
The device comprises of three or four direction switches and
a User Switch connected to the OMNI2 via the 9-way D-type
connector. In addition, a normally-closed User Switch should
be connected to the OMNI2 via the 3.5mm / 1/8" jack socket.
This switch, although functionally identical to the switch input
on the 9-way D-type connector, is required to provide a fail-
safe emergency-stop system.
Fig. 2.5
Fig. 2.4
2.11 Sip and Puff Device and User Switch, (Fig. 2.6).
A Sip and Puff mouthpiece is connected to the OMNI2 via
the pneumatic input. In addition, a normally-closed User
Switch should be connected to the OMNI2 via the 3.5mm /
1/8" jack socket. This switch is required to provide a fail-safe
emergency-stop system.
Fig. 2.6
OMNI2 Rev.A