1.0
R-Net OMNI2 Introduction
1.1 Introduction
The OMNI2 is a universal specialty controls interface that accepts signals
from many different types of Specialty Input Devices, (SIDs) and translates
them into commands compatible with the R-net control system.
1.2 Controls & Connections
The OMNI2 comprises of two sections – a Display Section and an Input
Section. The following diagrams show the controls and connections for
each, (Fig. 1.0, 1.1).
Fig. 1.0
Fig. 1.1
Communications
Connector
Reserved for
Future Use
4
On/Off Button
Profile Button
- Button
Display / Input Section Connector
On/Off Switch Jack
SID Port 1
9-Way D-Type
User Switch Jack 1
Settings Button
LDC Screen
Mode Button
Indoor Slow
+ Button
Speaker
Sip and Puff Input
SID Port 2
9-Way D-Type
User Switch Jack 2
Charger
Socket
USB Port
Display / Input
Section Connector
OMNI2
Rev.A