Operation With Single Switch Scanner-Type Sids; Drive; Momentary Operation; Latched Operation - Sunrise Medical QUICKIE OMNI2 Instructions For Use Manual

3.8 Operation with Single Switch Scanner-Type SIDs,

(Fig. 3.4)
All functions, including drive, can be accessed via a single
switch connected to one of the OMNI2's User Switch jack
sockets. For details of installation and connections, please
refer to section 2.0.

3.8.1 Drive

The scanning rate in Drive Mode can be programmed to suit
the user. Refer to your health care professional or servicing
agent. When the OMNI2 is switched on, a screen like the one
shown in Fig. 3.4 will appear:
Fig. 3.4
Indoor Slow
The OMNI2 will scan through the following icons:
The method of driving is dependent on whether the R-net
system is configured for 'momentary' or 'latched' operation.
OMNI2 Rev.A

3.8.2 Momentary Operation

In momentary operation, continuously depressing the User
Switch whilst one of the 'arrow' icons is shown will cause
the powerchair to drive in that direction until the switch is
released. If the User Switch is depressed when the 'M' icon is
shown, the OMNI2 will enter the User Menu.

3.8.3 Latched Operation

In latched operation, a single depression of the User Switch
whilst one of the 'arrow' icons is shown will cause the
powerchair to drive in that direction for a period of time set
by the program. Refer to your health care professional or
servicing agent.
To simplify control of the chair while driving in latched
forwards, the scan sequence will display:
Forward, Right, Reverse, Left, Reverse, Right, Reverse, Left,
Reverse, Right, Forward.
Depress the User Switch to select the new direction displayed.
15