Table of Contents
Advertisement
3.8.6 Lighting Control Mode
While in Lighting Control Mode, a screen will appear. Forward
and Reverse SID commands will select each lighting function.
A Left or Right SID command will switch on the function,
(Fig. 3.9). Another Left or Right SID command will switch the
function off.
Fig. 3.9
Lights
Lights
Left Turn
Right Turn
Hazards
An operation of the User Switch or a Right SID command while
Exit is highlighted, exits to the User Menu.
If User Control is set to Sequence, then selecting the Exit
option will sequence to the next available menu entry, (Refer
to section 2.15).
3.8.7 Latched Operation
Latched operation is available with the OMNI2 or a standard
JSM.
Within the standard R-net programming, the relevant
parameters are: Latched Drive, Latched Actuators, Latched
Timeout and Latched Timeout Beep. Please refer to your
health care professional or servicing agent.
OMNI2
Rev.A
On
Off
Off
Off
4.0
OMNI2 LCD Screen
4.1 LCD Screen Details
The screen is split into four areas of information : Battery
Indicator, Information Bar, Main Area and Text Bar. Each area is
detailed separately in the following sections.
Indoor Slow
Battery Indicator
This displays the charge available in the battery and can be
used to alert you to the status of the battery.
Steady: This indicates that all is well.
Flashing Slowly: The control system is functioning correctly,
but you should charge the battery as soon as possible.
Stepping Up: The powerchair batteries are being charged. You
will not be able to drive the powerchair until the charger is
disconnected and you have switched the control system off
and on again.
Information Bar
This area contains information and warning symbols, as well as
a clock.
Fig. 4.0
Battery
Indicator
Information Bar
Main Area
Text Bar
17
Advertisement
Table of Contents
