Table of Contents
Advertisement
R-net Omni2 bluetooth set-up & operation user guide
There are programmable options for the timings and sensitivity of the operations.
3 Operating an Android device
The operating method is similar to that of a Windows PC and the same programmable options apply.
3.1
Considerations
The Omni2 cannot switch an Android device on or off
The Sleep function of the Android device must be disabled
If the device does 'go to sleep', then a manual wake-up process will be needed.
4 Operating an iDevice
The Omni2 can control an iDevice in two ways:
Using the iDevice's Switch Control functionality
Using the iDevices Switch Control functionality in conjunction with the iDevice's VoiceOver functionality
These two methods will be referred to as Switch Control and VoiceOver respectively, and each is explained in
the following sections.
4.1
Switch control
The principle of Switch Control is that certain iDevice commands, such as the Home button or tapping the
screen, can be assigned to commands received via Bluetooth from an external device such as the Omni2.
The process for assigning Omni2 commands to the iDevice commands is covered in section Switch Control
Set-Up.
An example of Switch Control is given below. Please note, the screen navigation sequences are defined by the
iDevice and not the Omni2.
7
7337A R-NET OMNI2 Set-up & Operation User Guide
magicmobility.com.au
Advertisement
Table of Contents
