Table of Contents
Advertisement
Drawer kick-out connector status (n = 2):
Bit
Off/On
Hex
0
Off
00
On
01
1-3
On
02
4
Off
00
5,6
-
-
7
Off
00
n = 3: Slip status:
Value
Slip status
(00000000)B
There is no printing area on the current slip or slip paper is not selected.
(00000001)B
It is possible to print one line excluding double-height characters on the current slip.
(00000010)B
It is possible to print one line including double-height characters on the current slip.
(00000011)B
It is possible to print one line more.
The user can confirm whether more printing space is available on the current slip using GS r 3.
When more printing space is available in the current specified line spacing, the printer transmits (03)H.
When only one line, including double-height characters, is available, the printer transmits (02)H.
When only one line, excluding double-height characters, is available, the printer transmits (01)H.
If no lines remain on the current slip, the printer transmits (00)H. However, when printing stop by detecting paper end is enabled, the
printer ejects the slip and waits for the next slip to be inserted but does not transmit (00)H.
References: DLE EOT, ESC v, ESC u, GS ENQ, GS a
DLE EOT BS n
Transmit real time MICR status
Hexadecimal code: 10 04 08 n
Range:
n = 1
Transmits the selected MICR status specified by n in real time as follows:
n
Function
1
Transmits MICR status
Notes: -
The status information to be transmitted is shown in the tables below.
-
The printer starts MICR status transmission when this command is buffered in the receive
buffer.
-
When transmitting status, the printer transmits only 1 byte without confirming the
condition of the DSR signal.
-
This command is executed even when the printer is off-line, the receive buffer is full, or
in an error status.
Epson TM-U950 Commands
Decimal
Function
0
Level of pin 3 is LOW.
1
Level of pin 3 is HIGH.
2
Undefined
0
Not used. Fixed to On.
-
Undefined.
0
Not used. Fixed to Off.
4-39
Hide quick links:
Advertisement
Table of Contents
