Olivetti PR 4 Programmer's Manual page 59

ESC c 1 n
Select paper type(s) for command settings
Hexadecimal code: 1B 63 31 n
n = 1-7
Range:
Selects the type of paper for command setting, using n as follows:
Bit Off/On Hex
0 Off 00
On 01
1 Off 00
On 02
2 Off 00
On 04
3-7 - -
Notes: - If the value of n is out of the specified range, the printer ignores this command.
n = 7
Default:
References: ESC 2, ESC 3
ESC c 4 n
Select paper sensor(s) to stop printing
Hexadecimal code: 1B 63 34 n
n = 0-255
Range:
Selects the paper sensor(s) used to stop printing when a paper-end is detected, using n as follows:
Bit Off/On Hex
0 Off 00
On 01
1 Off 00
On 02
2 Off 00
On 04
3 Off 00
On 08
4 Off 00
On 10
5 Off 00
On 20
6-7 - -
Epson TM-U950 Commands
Decimal Function
0 Journal paper roll disabled.
1 Journal paper roll enabled.
0 Receipt paper roll disabled.
2 Receipt paper roll enabled.
0 Slip paper disabled.
4 Slip paper enabled.
- Undefined.
Decimal Function
0 Journal near end sensor disabled.
1 Journal near end sensor enabled.
0 Receipt near end sensor disabled.
2 Receipt near end sensor enabled.
0 Journal sensor disabled.
4 Journal sensor enabled.
0 Receipt sensor disabled.
8 Receipt sensor enabled.
0 Slip insertion sensor disabled.
16 Slip insertion sensor enabled.
0 Slip insertion sensor disabled.
32 Slip insertion sensor enabled.
- Undefined.
4-23