Setting the LCD Contrast
You can change the contrast to help the LCD look lighter or darker.
1
Menu
Press
2
Press
—OR—
Press
Set
Press
.
3
Stop/Exit
Press
Setting the Tray Use for Copy mode
If your MFC does not have the optional tray #2, you can skip this
setting. The default setting of Auto allows *
paper from the optional Tray #2 when paper is out in Tray #1 or
2
*
when the size of the original document will fit best on the paper in
Tray #2.
1
Menu
Press
2
Press
Only , Tray#2 Only or Auto .
3
Set
Press
.
4
Stop/Exit
Press
■
*1 Copies will automatically be printed from Tray #2 only if
the Paper Size setting for Tray #2 is the same as Tray #1.
■
*2 Copies will automatically be printed from Tray #2 if the
Paper Size setting for Tray #2 is different than Tray #1 and
this paper size is more suitable for the scanned original
document.
4 - 12 GETTING STARTED
1
7
,
,
.
to increase the contrast.
to decrease the contrast.
.
1
8
,
,
.
or
to select Tray#1
.
General Setup
7.LCD Contrast
1
your MFC to choose the
General Setup
8.Tray Use:Copy