Remote Commands - Brother MFC-8220 User Manual

Remote commands

Follow the commands below to access features when you are away
from the MFC. When you call the MFC and enter your Remote
Access Code (3 digits followed by
beeps and you must enter a remote command.
Remote commands
95 Change the Fax
Forwarding, Paging or Fax
Storage settings
1 Off
2 Fax Forwarding
3 Paging
4 Fax Forwarding number
6 Fax Storage
96 Retrieve a fax
2 Retrieve all faxes
3 Erase faxes from the
memory
8 - 6 REMOTE FAX OPTIONS
), the system will give two short
Operation details
You can select Off after you have retrieved
or erased all your messages.
If you hear one long beep, the change has
been accepted. If you hear three short beeps,
you cannot change it because the conditions
have not been met (for example, registering a
fax forwarding or paging number). You can
register your Fax Forwarding number by
entering 4. (See Changing your Fax
Forwarding number on page 8-8.) Once you
have registered the number, Fax Forwarding,
will work.
You can select Off after you have retrieved
or erased all your messages.
Enter the number of a remote fax machine to
receive stored fax messages. (See Retrieving
fax messages on page 8-8.)
If you hear one long beep, you can erase fax
messages from the memory.