Brother MFC-8220 User Manual page 110

3
Press
Fax/Tel (or E-Address ).
Set
Press .
4
Enter the phone or fax number (up to 20 digits).
Set
Press .
—OR—
If you purchased the optional NC-9100h, you can select
E-Address in Step 3 and then press
■ If you want to enter a pause in the dialing sequence (for example,
to access an outside line), press
entering the digits.
Each key press of
when the number is dialed, displayed by a dash on the screen.
5
Use the dial pad to enter the name (up to 15 characters).
Set
Press .
(You can use the chart on page 4-3 to help you enter letters.)
—OR—
Set
Press
6
Go to Step 2 to store another One-Touch number.
—OR—
Stop/Exit
Press
When you dial an auto dial number, the LCD shows the name
and number you have stored, or, if you have not stored a name,
only the number you have stored.
or to select
Redial/Pause
to store the number without a name.
.
AUTO DIAL NUMBERS AND DIALING OPTIONS 7 - 2
One-Touch Dial
Fax/Tel
Set
.
Redial/Pause
enters a 3.5 second pause
as you are