Table of Contents
Advertisement
e-MovAir-IOM-20.04-EN
•
Model;
•
Air flow-rate in m3/h;
•
Pressure gain in Pa;
•
Serial number;
•
Power of the motor/motors installed in kW
•
Number of poles of the motor/motors
•
Power supply voltage in "V";
•
Power supply frequency in "Hz";
•
Number of phases, indicated by "Ph"
•
Date of manufacture.
TO ENSURE A PROMPT RESPONSE TO REQUESTS FOR INFORMATION, WHEN CONTACTING
THE OFFICE PLEASE PROVIDE THE UNIT SERIAL NUMBER. THIS WILL ALLOW THE TECHNICAL-
SALES DEPARTMENT TO PROVIDE THE REQUIRED INFORMATION CORRECTLY.
5.0. INSTALLATION AND COMMISSIONING
5.1. DEFINITIONS
USER – The user is the person, organisation or company that has purchased or leased the unit and
that intends to use it for the purposes it has been designed for.
OPERATOR – The operator is the physical person authorised by the user to operate the machine.
SPECIALIST PERSONNEL - These are people who have been specifically trained and are thus able to
identify the dangers deriving from the use of this unit and consequently avoid them.
5.2. SAFETY STANDARDS
THE MANUFACTURER DECLINES ALL LIABILITY FOR THE FAILURE TO OBSERVE THE
FOLLOWING SAFETY STANDARDS.
IT FURTHERMORE DECLINES ALL LIABILITY FOR DAMAGE CAUSED BY THE IMPROPER USE OF
THE UNIT AND/OR MODIFICATIONS MADE WITHOUT AUTHORISATION.
INSTALLATION MUST BE PERFORMED BY SPECIALIST PERSONNEL.
•
During installation, always wear suitable safety clothing, for example: glasses, gloves, etc., as
described in the EC 686/89 and following standards.
•
During installation, all work must be performed in complete safety, in an environment that is
clean and free of obstacles.
•
Always observe the laws in force in the country where the unit is installed relating to the use
and disposal of the packaging and the products used for the cleaning and maintenance of the
unit, as well as the recommendations of the manufacturer of such products.
•
Before starting the unit, check that the various components and the entire system are in
perfect order.
•
Never touch or stand between the moving parts.
NEVER START ANY MAINTENANCE OR CLEANING WORK UNTIL THE POWER SUPPLY HAS
BEEN DISCONNECTED.
•
Maintenance and the replacement of damaged or worn parts must only be performed by
specialist personnel, following the instructions provided in this manual.
•
The spare parts must correspond to the requirements defined by the manufacturer.
e-MovAir-IOM-20.04-EN
16
www.lennoxemea.com
Advertisement
Table of Contents
