For Usb Interface Cable Users; For Mac Os; For Mac Os 8.6 To 9.2; 10.2.4 Or Greater - Brother MFC-210C Quick Setup Manual

Step 2

For USB Interface Cable Users

For Mac OS

Make sure that you have completed the instructions from Step 1 "Setting Up
the Machine" on pages 4 - 11.
For Mac OS
upgrade to Mac OS
(The latest information for Mac OS
please visit at: http://solutions.brother.com)
1
Turn off and unplug the machine from the
AC outlet and disconnect it from your
Macintosh
interface cable.
2
Turn on your Macintosh
3
Insert the supplied CD-ROM into your
CD-ROM drive.
4
Double-click the Start Here OSX icon to
install the printer driver, Scanner driver and
Remote Setup program. If the language
screen appears, select your language.
5
Click MFL-Pro Suite to install.
20
Installing the Driver & Software
®
X 10.2.4 or greater
®
X 10.2.0 to 10.2.3 user, please
®
X 10.2.4 or greater.
®
if you already connected an
®
.
6
Follow the on-screen instructions, and
restart your Macintosh
®
X, 7
After the DeviceSelector window appears,
connect the USB interface cable to your
Macintosh
The DeviceSelector window will not appear
if the USB interface cable has been
connected before restarting your
Macintosh
previously installed version of the Brother
Software. If you encounter this problem
continue with the installation skipping step
10 and then see the Software User's Guide
Chapter 8 for details on selecting what
machine the ControlCenter2.0 will connect
with.
To connect the USB cable to the machine:
1. Open the scanner cover to its open
position.
2. Insert the USB cable into the USB
socket, marked with a
will find the USB socket above and to the
left of the ink cartridge slots, as shown
below.
s
®
.
®
and then to the machine.
®
or if you are overwriting a
symbol. You