Brother MFC-210C Quick Setup Manual page 25

For Mac OS
Make sure that you have completed the instructions from Step 1 "Setting Up
the Machine" on pages 4 - 11.
1
Turn off and unplug the machine from the
AC outlet and disconnect it from your
®
Macintosh if you already connected an
interface cable.
2
Turn on your Macintosh
3
Insert the supplied CD-ROM into your
CD-ROM drive.
4
Double-click the Start Here icon to install
the printer and scanner drivers. If the
language screen appears, select your
language.
5
Click MFL-Pro Suite to install.
®
8.6 to 9.2
®
.
6
Follow the on-screen instructions, and
restart your Macintosh
7
Connect the USB interface cable to your
®
Macintosh , and then connect it to the
machine.
To connect the USB cable to the machine:
1. Open the scanner cover to its open
position.
2. Insert the USB cable into the USB
socket, marked with a
will find the USB socket above and to the
left of the ink cartridge slots, as shown
below.
3. Carefully route the USB cable throught
the trench and out the back of the
machine as shown below.
Warning
Ensure that the cable does not restrict the cover from
closing, or an error may occur.
DO NOT connect the machine to a
USB port on a keyboard or a non
powered USB hub.
®
.
symbol. You
Continued...
23