Installing Extra Memory - Brother DCP-8060 User Manual

Installing extra memory

a
Turn off the machine's power switch.
b
Disconnect the interface cable from the
machine, and then unplug the power
cord from the electrical socket.
c
Remove the DIMM cover and interface
access cover.
d
Unpack the DIMM and hold it by its
edges.
CAUTION
To prevent damage to the machine from
static electricity, DO NOT touch the
memory chips or the board surface.
e
Hold the DIMM by the edges and align
B
the notches in the DIMM with the
protrusions in the slot.
Insert the DIMM diagonally (1), then tilt it
toward the interface board until it clicks
into place (2).
f
Put the interface access cover and the
DIMM cover back on.
g
Plug the machine's power cord back into
the electrical socket first, and then
connect the interface cable.
h
Turn on the machine's power switch.
Options
49