Important Information For New Zealand - Brother DCP-8060 User Manual

Important Information for New
Zealand
Important Safety Instructions
a
Read all of these instructions.
b
Save them for later reference.
c
Follow all warnings and instructions
marked on the product.
d
Unplug this product from the wall outlet
before cleaning the outside of the
machine and the scanner glass. Do not
use liquid or aerosol cleaners. Use a
damp cloth for cleaning.
e
Do not place this product on an unstable
surface, stand, or table. The product
may fall, causing serious damage to the
product.
f
Slots and openings in the casing and the
back or bottom are provided for
ventilation; to ensure reliable operation
of the product and to protect it from
overheating, these openings must not
be blocked or covered. The openings
should never be blocked by placing the
product on a bed, sofa, rug, or other
similar surface. This product should
never be placed near or over a radiator
or heater. This product should not be
placed in a built-in installation unless
proper ventilation is provided.
g
This product should be connected to an
AC power source within the range
indicated on the rating label. Do NOT
connect it to a DC power source. If you
are not sure, contact a qualified
electrician.
44
h
This product is equipped with a 3-wire
earthed plug. This plug will fit into only
an earthed socket. This is a safety
A
feature. If you are unable to insert the
plug into the outlet, contact your
electrician to replace your obsolete
A
socket. Do not defeat the purpose of an
earthed plug.
i
Do not place anything on top of the
power cord including this machine. Do
not allow the power cord to be stepped
on.
j
Do not place anything in front of the
machine that will block received faxes.
Do not place anything in the path of
received faxes.
k
Do not touch a document during
printing.
l
Never push objects of any kind into this
product through cabinet slots, since they
may touch dangerous voltage points or
short out parts resulting in a risk of fire or
electric shock. Never spill liquid of any
kind on the product.
m
Do not attempt to service this product
yourself, because opening or removing
covers may expose you to dangerous
voltage points and/or other risks. Refer
all servicing to service personnel.
n
Unplug this product from the mains
power and telephone line sockets, and
refer servicing to qualified Service
Personnel under the following
conditions:
If the power cord is damaged or
frayed.
If liquid has been spilled into the
product.
If the product has been exposed to
rain or water.