Brother DCP-8060 User Manual page 52

i
This product is equipped with a 2-wire
grounding type plug or a 3-wire
grounding type plug (Only for
Singapore, Malaysia, Hong Kong and
India), a plug having two or three pins.
This plug will only fit into only a
grounding-type power outlet. This is a
safety feature. If you are unable to insert
the plug into the outlet, contact your
electrician to replace your obsolete
outlet. Do not defeat the purpose of the
grounding-type plug.
j
Do not place anything on top of the
power cord including this machine. Do
not allow the power cord to be stepped
on.
k
If an extension cord is used with this
product, make sure that the total
ampere ratings on the products plugged
into the extension cord do not exceed
the extension cord ampere rating.
l
Do not place anything in front of the
machine that will block received faxes.
Do not place nything in the path of
received faxes.
m
Do not touch a document during
printing.
n
Never push objects of any kind into this
product through cabinet slots, since they
may touch dangerous voltage points or
short out parts resulting in the risk of fire
or electric shock. Never spill liquid of any
kind on the product.
o
Do not attempt to service this product
yourself, as opening or removing covers
may expose you to dangerous voltage
points and/or other risks, and may void
your warranty. Please refer all servicing
to our Authorized Service Personnel. A
list of Authorized Service Centres has
been included for your convenience, or
you may contact the Brother Dealer for
Service.
46
p
Unplug this product from the wall outlet
and refer servicing to Authorized
Service Personnel under the following
conditions:
If the power cord is damaged or
frayed.
If the product has been spilled by
liquid.
If the product has been exposed to
rain or water.
If the product does not operate
normally when the operating
instructions are followed. Adjust only
those controls that are covered by
the operating instructions. Incorrect
adjustment of other controls may
result in damage and will often
require extensive work by a qualified
technician to restore the product to
normal operation.
If the product has been dropped or
the casing has been damaged.
If the product exhibits a distinct
change in performance, indicating a
need for service.
q
To protect your product against power
surges, we recommend the use of a
power protection device (Surge
Protector).
WARNING
For protection against the risk of electrical
shock, always disconnect all cables from
the wall outlet before servicing, modifying
or installing the equipment.
This equipment may not be used on coin
service lines provided by the telephone
company or connected to party lines.
Brother cannot accept any financial or other
responsibilities that may be the result of
your use of this information, including
direct, special or consequential damages.
There are no warranties extended or
granted by this document.