Important Information For Some Countries - Brother DCP-8060 User Manual

Brother dcp-8060: users guide
Hide thumbs Also See for DCP-8060:
Table of Contents

Advertisement

If the product does not operate
normally when the operating
instructions are followed. Adjust only
those controls that are covered by
the operating instructions. Incorrect
adjustment of other controls may
result in damage and will often
require extensive work by a qualified
technician to restore the product to
normal operation.
If the product has been dropped or
the casing has been damaged.
If the product exhibits a distinct
change in performance, indicating a
need for service.
IMPORTANT-For Your Safety
To ensure safe operation the three-pin plug
supplied must be inserted only into a
standard three-pin power point which is
effectively grounded through the normal
household wiring.
Extension cords used with the equipment
must be three-conductor and be correctly
wired to provide connection to ground.
Incorrectly wired extension cords are a major
cause of fatalities.
The fact that the equipment operates
satisfactorily does not imply that the power is
grounded and that the installation is
completely safe. For your safety, if in any
doubt about the effective grounding of the
power, consult a qualified electrician.
IMPORTANT NOTICE
Under power failure conditions, this
telephone may not operate. Please ensure
that a separate telephone, not dependent on
local power, is available for emergency use in
emergencies.
Important Information for
Some Countries
Important Safety Instructions
a
Read all of these instructions.
b
Save them for later reference.
c
Follow all warnings and instructions
marked on the product.
d
Unplug this product from the wall outlet
before cleaning the outside of the
machine and the scanner glass. Do not
use liquid or aerosol cleaners. Use a
damp cloth for cleaning.
A
e
Do not place this product near water.
f
Do not place this product on an unstable
cart, stand, or table. The product may
drop, causing serious damage to the
product.
g
Slots and openings in the casing at the
back or bottom are provided for
ventilation; to ensure reliable operation
of the product and to protect it from
overheating, these openings must not
be blocked or covered. The openings
should never be blocked by placing the
product on a bed, sofa, rug, or other
similar surface. This product should
never be placed near or on a radiator or
heater. This product should never be
placed in a built-in installation unless
A
adequate ventilation is provided.
h
This product should be connected to an
AC power source within the range
indicated on the rating label. DO NOT
connect it to a DC power source. If you
are not sure, contact a qualified
electrician.
Safety and Legal
A
A
45

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dcp-8065dn

Table of Contents