Part 5: Factory Preset Values; Table 5.1 Factory Preset Values - Omega Engineering i Series User Manual

PART 5
FACTORY PRESET VALUES
Table 5.1 Factory preset value
MENU ITEMS
Set Point 1 (SP1)
Set Point 2 (SP2)
Input:
Input Type (INPT)
Ratiometric Operation (RTIO)
Display Resolution (RESO)
b
Button
Reading Configuration (RDG):
Decimal Point (DEC.P)
Linearization Points (L.PNt)
Filter Value (FLTR)
Input/Reading (IN.RD)
Scale and Offset
Alarm 1 & 2 :
Alarm 1 (ALR1), Alarm 2 (ALR2)
Absolute/Deviation (ABSO/DEV)
Latch/Unlatch (LTCH/UNLT)
Contact Closure (CT.CL)
Active (ACTV)
Alarm At Power On (A.P.ON)
Alarm Low (ALR.L)
Alarm High (ALR.H)
Setpoint Deviation:
Setpoint Deviation
ID :
ID Value
Full ID (FULL)
Set Point ID (ID.SP)
FACTORY PRESET VALUES
000.0
000.0
0 TO 100 MV (0-0.1)
Enable (ENBL)
Low (LO)
Peak (PEAK)
FFF.F
0002
0004
0-100 mV = 0-9999
Disable (DSBL)
Absolute (ABSO)
Unlatch (UNLT)
Normally Open (N.O.)
Above (ABOV)
Disable (DSBL)
-100.0
400.0
Disable (DSBL)
0000
Disable (DSBL)
Disable (DSBL)
45
NOTES
Alarm 1 only