Omega Engineering i Series User Manual page 42

PEAK VALUE SUBMENU:
Includes Peak Value in the data string.
Press d
Press b
Press d
GROSS VALUE SUBMENU:
Includes Gross Value in the data string.
Press d
Press b
Press d
UNIT SUBMENU (not applicable):
Press d
Press b
Press d
ADDRESS SETUP SUBMENU:
This menu is applicable to the RS-485 Option only.
Press d
ADDRESS VALUE SUBMENU:
Press d
Press b & c 55) Press b and c to enter new "Address Value".
Press d
44) Display flashes previous selection for PEAK Submenu.
45) Scroll through the available selections: NO, YES.
46) Display shows STRD stored message momentarily and then
advances to GROS only, it was changed, otherwise press a to
advance to GROS Gross Submenu.
47) Display flashes previous selection for "Gross".
48) Scroll through the available selections: NO, YES.
49) Display shows STRD stored message momentarily and then
advances to UNIT only, if it was changed, otherwise press a to
advance to UNIT Unit Submenu.
50) Display flashes previous selection for UNIT .
51) Scroll through the available selections: NO, YES.
52) Display shows STRD stored message momentarily and then
advances to ADDR only, if it was changed, otherwise press a to
advance to ADDR Address Setup Submenu.
53) Display advances to "Address Value" (0000 to 0199)
Submenu.
54) Display flashes 1
56) Display shows STRD stored message momentarily and then
advances to TR.TM only, if it was changed, otherwise press a to
advance to TR.TM Transmit Time Interval Submenu.
st
digit of previously stored Address Value.
38