Page 2
CONTACT Omega Engineering, Inc. omega.com/contact-us Toll-Free: 1-800-826-6342 (USA & Canada only) Customer Service: 1-800-622-2378 (USA & Canada only) Engineering Service: 1-800-872-9436 (USA & Canada only) Telephone: (203) 359-1660 Fax: (203) 359-7700 Email: info@omega.com For other locations visit: omega.com/worldwide The information contained in this document is believed to be correct, but Omega accepts no liability for any errors it contains, and reserves the right to alter specifications without notice.
Page 3
Table of Contents Introduction ...................................4 Downloading the Latest Firmware ..........................4 Upgrading the iServer 2 with the Latest Firmware ....................7 Table of Contents...
Page 4
2. Step 1: Ensure the iServer 2 has been setup, operational, and that the user has access to a PC or laptop with a web browser.
Page 5
Step 4: From the iServer 2 webserver interface, click the System tab on the upper right of the screen. A System Configuration pop-up window will appear. Figure 3: Webserver UI System tab Step 5: Click the Download Firmware button. Note that two download links will appear.
Page 6
Step 6: Click on both download links that appear to download both firmware upgrade files. Note that both files are necessary to successfully complete the firmware upgrade. Figure 5: iServer 2 firmware download links iServer 2 Firmware Upgrade Guide...
Page 7
Step 1: From the System tab in the iServer 2 webserver interface, click on the Browse button to locate the first firmware file that will be used in the upgrade. The user may choose to start with either firmware file (.bin or .hex) as the order does not matter.
Page 8
Click Open to finalize the selection. Figure 7: Firmware file selection for iServer 2 upgrade Step 3: With one of the firmware files selected, click the Upgrade button. The iServer 2 will begin the upgrade process and will reboot when the process is complete.