Omega Engineering i Series User Manual page 46

Example 3:
Setpoint 1: 200
Setpoint 2: 200
Alarm 1 & 2 Setup: Deviation, Band, "ALR.H" = 10
Color Display Setup: "N.CLR" = Green, "1.CLR" = Amber, "2.CLR" = Red
Display Colors change sequences:
AMBER AMBER
•➤ --------------- • ------ • ------ • -------------------------------- • ------ • ------- • ---------------- ➤
0 190 200 210
Alarm 1 is designed to monitor the Process Value around the Setpoint 1.
Alarm 2 is designed to monitor the Process Value around the Setpoint 2.
Example 4:
Setpoint 1: 200
Setpoint 2: 200
Alarm 1 Setup: Deviation, Band, "ALR.H" = 20
Alarm 2 Setup: Deviation, Hi/Low, "ALR.H" = 10, "ALR.L" = 5
Color Display Setup: "N.CLR" = Green, "1.CLR" = Amber, "2.CLR" = Red
Display colors change sequences:
AMBER
• -- ➤ --------------- • ---------------- • ------------- • -------------- • ------------- • --------------------- ➤
0 180
Reset: The instrument automatically resets after the last menu of
the Configuration Mode has been entered. After the instrument
resets, it advances to the Run Mode.
AMBER
RED GREEN
195
GREEN
290 300 310
GREEN RED
200 210
42
AMBER
AMBER
220