Exporting Source Names And Destination Names - Sony MVS-8000 User Manual

3

Exporting Source Names and Destination Names

To send the source names and destination names to the S-Bus, use the
following procedure.
1
2
3
4
90
Cross-Point Settings (Xpt Assign Menu)
Knob Parameter
3 Table No
Press [Table Assign Set].
This sets the table for the selected switcher bank.
In the Panel >XPT Assign menu, press [Name Export].
The Name Export menu appears.
Turn the knob to set the station ID.
Knob Parameter Adjustment
1 Station ID Station ID setting
a) If set to 255, the information is sent to all stations (with display of "All").
Press [Src Name Export].
This exports the source names to the station selected in step 2.
Press [Dest Name Export].
This exports the destination names to the station selected in step 2.
Notes
Since destination names cannot be selected freely, fixed names are used.
Adjustment Values
Selection of table 1 to 15
to be assigned
Setting values
1 to 255
a)