Assigning Preview Output To Preview Selection Buttons - Sony MVS-8000 User Manual

3
To return the key assignment to the default
In the Compact Key Module Assign menu, press [Default].
This returns all key assignments to their factory default state.

Assigning Preview Output to Preview Selection Buttons

It is possible to assign any preview output to a preview selection button.
This applies to the preview selection buttons in the fade-to-black control block
and the downstream key/fade-to-black control block.
Notes
This operation cannot be done in the CCP-9000/9000A.
1
2
3
4
5
76
Overall Control Panel Settings (Config Menu)
Here, press on the intersection of the "2nd Row" column and "Module
Assign" row.
In the <Module Assign> group, select the key you want to assign.
In this example, select [Key3,4].
In the Panel >Config menu, press [Link/Program Button].
The Link/Program Button menu appears.
Press [Fade To Black Module].
The Fade To Black Module menu appears.
On the left of the status area, preview selection buttons (1 to 11) appear.
On the right side a list of signals to be assigned appears.
In the button indications on the left, press the button for the assignment.
Using any of the following methods, select the signal to be assigned.
• Press directly on the list on the right.
• In the list on the right, press the arrow keys to scroll the reverse video
cursor.
• Turn the knob.
Knob Parameter
1 Button
Press [Set].
This assigns the signal selected in the list to the button.
Adjustment
Button selection
Setting values
1 to 20