Setting The Button Operation Mode - Sony MVS-8000 User Manual

2

Setting the Button Operation Mode

1
2
124
Operation Settings (Operation Menu)
Make the following settings as required.
When making settings for the Wipe Snapshot menu or DME Wipe
Snapshot menu memory recall buttons: In the <Wipe/DME
Display> group, press to select [Pattern] or [Register Name].
When making settings for the Misc >Snapshot menu memory recall
buttons: In the <Snapshot/Effect Display> group, press to select
[Register No] or [Register Name].
In the Panel >Operation menu, press [Custom Button].
The Custom Button menu appears.
The status area shows a list of the items with their settings.
Make the following settings as required.
Operation mode of the [ALL] button in the transition control block:
To specify the next transition to be selected by pressing the [ALL]
button in the transition control block, press the next transition you
want to select, turning it on, in the <Next Trans All> group. If
everything here is set to Off, then pressing the [ALL] button does not
change the specification of the next transition.
Operation mode during an auto transition: For the operation mode
when the [AUTO TRANS] or [TAKE] button is pressed once more
during an auto transition, select [Continue] or [Cancel] in the <Auto
Trans/Take> group.
Continue: Continue the auto transition.
Cancel: Cancel the auto transition and return to the state before
starting the auto transition.
Operation mode during keyframe execution: For the operation mode
when the [RUN] button is pressed once more during effect execution,
select [Continue] or [Cancel] in the <Run> group.
Continue: Continue the execution.
Cancel: Cancel the execution and return to the state before starting the
execution.
Status display for auto transition execution button: When the [AUTO
TRANS] or [TAKE] button is pressed to carry out an auto transition,
select how the button is lit or off in the <Auto Trans/Take Key On
Stats> group.
Disable: Lights amber during the transition, and goes off at the end of
the transition.
Enable: Lights green during the transition, and at the end of the
transition lights red if on air and amber if not on air.