Sending A Fax Manually; Automatic And Manual Re-Dialling - Brother Fax-1020Plus Owner's Manual

2. Enter the fax number. You can use
number-keys dialling, One-Touch
dialling, Speed dialling, or Tel-
Index.
Example: One-Touch dialling.
3. Press Start.

Sending a Fax Manually

KEYS TO PRESS
1. Insert the documents face down into
the feeder.
2. Pick up the handset and listen to the
dial tone.
3. Enter the fax number. You can use
number-keys dialling, One-Touch
dialling, Speed dialling, or Tel-
Index.
4. When you hear the fax tones from
the remote machine, press Start
again.
Your fax machine will begin sending
the documents.
5. Return the handset to its cradle.

Automatic and Manual Re-dialling

If a number you have dialled is busy or your call did not go through for some other reason,
you can re-dial that number. There are two ways to re-dial, "automatic" and "manual."
Automatic redialling can only be used for faxes that were sent using automatic transmission—
not for telephone calls. The fax machine will automatically re-dial the number 4 times at 2
minutes intervals (for the U.K.), 3 times at 2 minutes intervals (for Ireland), before giving
up. It will re-dial the last dialled number when you press Redial/Pause (manual re-dialling).
SENDING FAXES - CHAPTER 6
SWISS OFFICE
DIALLING
SEND P.01 STD
THE DISPLAY WILL SHOW:
09/12 15:25
FAX: NO. & START
COPY: PRESS COPY
ENTER FAX NO.
THEN PRESS START
SWISS OFFICE
SEND P.01 STD
FAX
6-6