Sending A Fax Manually; Sending A Fax At The End Of A Conversation; Out Of Memory Message - Brother FAX-2480C User Manual

Chapter 5

Sending a fax manually

Manual transmission lets you hear the
dialling, ringing and fax-receiving tones while
sending a fax.
a
Make sure you are in Fax mode
b
Load your document.
c
Pick up the handset of the machine.
You can also press Hook/Hold/Recall
and listen for a dial tone.
d
Dial the fax number you want to call.
e
When you hear the fax tone, press
Mono Start or Colour Start.
If you are using the scanner glass,
press 1 to send the fax.
1.Send 2.Receive
f
If you picked up the handset replace it.
Sending a fax at the end of a
conversation
At the end of a conversation you can send a
fax to the other party before you both hang
up.
a
Ask the other party to wait for fax tones
(beeps) and then to press the Start or
Send key before hanging up.
b
Make sure you are in Fax mode
c
Load your document.
d
Press Mono Start or Colour Start.
If you load the document on the
scanner glass, press 1 to send the
fax.
1.Send 2.Receive
e
Replace the handset.
30

Out of Memory message

5
If you get an Out of Memory message while
scanning the first page of a fax, press
Stop/Exit to cancel the fax.
If you get an Out of Memory message while
.
scanning a subsequent page, you will have
the option to press Mono Start to send the
pages scanned so far, or to press Stop/Exit
to cancel the operation
Note
If you get an Out of Memory message
while faxing and you do not want to delete
your stored faxes to clear the memory,
you can send the fax in real time. (See
Real time transmission on page 28.)
5
.
5