Setting Your Changes As A New Default; Restoring All Settings To The Factory Settings; Sending A Fax Manually - Brother MFC-440CN User Manual

Chapter 5
f
When you have finished, press
Stop/Exit.
Setting your changes as a
new default
You can save the fax settings for
Fax Resolution, Contrast,
Real Time TX and Scan Size you use
most often by setting them as default. These
settings will stay until you change them again.
a
Press (Fax).
b
Press a or b to choose your new
setting.
Press OK.
Repeat this step for each setting you
want to change.
c
After changing the last setting, press a
or b to choose Set New Default.
Press OK.
d
Press 1 to choose Yes.
e
Press Stop/Exit.
Restoring all settings to the
factory settings
You can restore all the settings you have
changed to the factory settings. These
settings will stay until you change them again.
a
Press (Fax).
b
Press a or b to choose
Factory Reset.
Press OK.
c
Press 1 to choose Yes.
d
Press Stop/Exit.
38

Sending a fax manually

Manual transmission lets you hear the
dialling, ringing and fax-receiving tones while
sending a fax.
5
a
Press
b
Load your document.
c
Pick up the handset of an external
phone or the machine and listen for a
dial tone.
You can also press Speaker Phone
(MFC-660CN) and listen for a dial tone.
d
Dial the fax number you want to call.
If you pressed Speaker Phone, dial
using the machine's dial pad. If you
picked up the external handset, dial on
the external phone.
e
When you hear the fax tone, press
Mono Start or Colour Start.
If you are using the scanner glass
press 1 to send a fax.
f
If you picked up the handset replace it.
5
(Fax).
5