Brother Fax-1020Plus Owner's Manual page 196

IMPORTANT INFORMATION
15. Unplug this product from the mains power and telephone line sockets, and refer servicing
to qualified service personnel under the following conditions:
A. When the mains power cord is frayed or the plug is damaged.
B. If liquid has been spilled into the product.
C. If the product has been exposed to rain or water.
D. If the product does not operate normally when the operating instructions are
followed. Adjust only those controls that are covered by the operating instructions
since improper adjustment of other controls may result in damage and will often
require extensive work by a qualified technician to restore the product to normal
operation.
E. If the product has been dropped or the cabinet has been damaged.
F. If the product exhibits a distinct change in performance, indicating a need for
service.
For Fax-1030Plus only
BABT approval (For U.K. only)
This apparatus has been approved by the British Approvals Board for Telecommunications,
for use of the following facilities:
INTEGRAL MODEM IN GROUP 3 FACSIMILE
LOUDSPEAKING FACILITY (CALL PROGRESS MONITOR)
STORAGE OF TELEPHONE NUMBERS FOR RETRIEVAL BY PREDETERMINED
CODE
CONNECTION TO AN APPROVED PBX (PRIVATE BRANCH EXCHANGE)
OPERATION IN THE ABSENCE OF PROCEED INDICATION
AUTOMATIC STORAGE OF THE LAST NUMBER REDIALLED
SERIES CONNECTION FACILITY
Any other usage will invalidate the approval of the apparatus, if as a result it then ceases to
comply with the standards against which approval was granted.
The machine is approved for connection to a single exclusive direct exchange line provided
by BT, Kingston-upon-Hull Telecommunications and CATV, and to approved Private
Automatic Branch Exchanges (PABXs).
The connection to the BT network must not be hard-wired.
This equipment is NOT approved for connection to the following:
1 + 1 Carrier Systems;
Leased Lines;
Shared Service ("Party") Lines;
As an extension to a Payphone;
Stored telephone numbers are retained in the absence of mains power. The loudspeaking
facility (call progress monitor) will not function, nor will the telephone, unless the unit is
15-2