Automatic Fax Only Reception (Fax Mode); Manual Reception (Manual Mode); Fax Detect - Brother Fax-1020Plus Owner's Manual

Automatic Fax Only Reception (FAX Mode)

You can automatically receive all your faxes in Automatic Fax Reception mode (FAX light
is ON). Select this mode by pressing Mode.

Manual Reception (MANUAL Mode)

When you set the Answer Mode to manual, you must answer each incoming call yourself.
Here is what you should do when using MANUAL Mode:
If You Get a...
1. Phone call
2. Phone call and request
to send a fax
3. Fax tone...

Fax Detect

When you use this feature, you don't have to press Start, but need to wait for several
seconds quietly, when you answer a fax call. Just replace the handset after your fax machine
begins to receive the fax. Selecting "ON" allows the machine to receive fax calls
automatically, even if you lift the handset of an extension. Selecting "SEMI" lets the fax
machine receive the call only if you've answered it at the fax machine. Selecting "OFF"
means you'll have to activate the fax machine yourself by pressing Start or entering the
remote activation code from an extension phone.
KEYS TO PRESS
1. Press Menu.
2. Press 7.
3. Press 6.
4. Press Z (left arrow) or X (right
arrow) to choose ON, SEMI or OFF.
Example: SEMI.
RECEIVING FAXES AND OTHER CALLS - CHAPTER 7
Then You Should...
Talk as you normally would.
Press Start when finished talking, and replace the handset.
Note: Sender must also press Start.
Press Start, and replace the handset.
THE DISPLAY WILL SHOW:
09/12 15:25
1.TEMP.SETTINGS
7.SETUP SYSTEM
6.FAX DETECT
FAX DETECT:ON
SELECT { } & SET
FAX DETECT:SEMI
FAX
7-2