Motorola APX 8500 Manual page 147

(continued)
Logging In as a User
Procedure:
DEMO
1. From the home screen, scroll left or right to
User.
2. Press the Menu Select button directly below
User.
The display shows the User Login screen.
Scroll up or down to [ID Entry] and press the
3.
Menu Select button directly below Edit to enter
ID. A blinking cursor appears on the screen. Use
the keypad to type or edit a user name. Press the
Menu Select button directly below Ok to submit.
OR
Scroll up or down to scroll through the list of
predefined user names. Press the Menu Select
button directly below Sel to select the predefined
user name.
OR
Press and hold up or down to scroll through the
list of predefined user names at a fast scroll rate.
Press the Menu Select button directly below
Login to select the predefined user name.
If the selected predefined username has more than
eight (8) characters, or an invalid character in it, the
display momentary shows Invalid ID.
4. Press the Menu Select button directly below
PIN.
A blinking cursor appears.
5. Enter your Personal Identification Number (PIN).
The maximum PIN length is four digits. The PIN
number appears as asterisks.
6. Press the Menu Select button directly below
Logn.
In ARS Server Mode, the display shows the User
Login Indicator icon, the ID, and In progress,
with Cncl.
OR
In ARS Non-Server Mode, the display shows the
User Login Indicator icon, the ID, and Logged in,
with Logt and Exit.
OR
In non-ARS enabled mode, the display shows
Offline, with Logt and Exit.
147
CONTENTS
ADVANCED FEATURES
< PREV NEXT >