Changing Your Tactical Inhibit Password - Motorola APX 8500 Manual

Security

Changing Your Tactical Inhibit Password

The Tactical Inhibit Password is required for the
Radio Stun and Radio Kill features. You can set up
to 8 characters for this password.
Procedure:
1. From the home screen, scroll left or right to
Pswd.
2. Press the Menu Select button directly below
Pswd.
The display shows Change Password screen.
Scroll up or down to Tactical Inh Encode
3.
Pswd.
4. Press the Menu Select button directly below
Sel.
5. Enter the old password.
Press the Menu Select button directly below OK.
6.
7. Enter the new password.
Press the Menu Select button directly below OK.
8.
9. Re-enter the new password.
Press the Menu Select button directly below OK.
10.
The password is updated.
If the two passwords do not match, repeat Step
5 through 10.
Note: If you enter three incorrect old passwords, the
radio exits the password feature. You cannot access
this feature again until you turn the radio off and on.
182
CONTENTS
ADVANCED FEATURES
< PREV NEXT >