Changing Priorities Status While Scan Is On - Motorola APX 8500 Manual

Scan

Changing Priorities Status While Scan is On

While the radio is scanning, the dynamic priority change feature allows you to temporarily change any channel
in a scan list (except for the Priority-One channel) to the Priority-Two channel.
This change remains in effect until scan is turned off. Scan then reverts to the preprogrammed (original)
setting.
Procedure:
Press the Menu Select button directly below DYNP to change the priority of a non-priority channel in the
1.
scan list to Priority-Two.
2. Press the Home button momentarily to exit the scan list and resume scanning.
122
CONTENTS
ADVANCED FEATURES
< PREV NEXT >