Restoring a Nuisance Channel
Procedure:
To restore the deleted nuisance channel, do one of the
following:
•
Turn scan off, then on.
OR
•
Change modes.
OR
•
Turn off the radio, and then turn it back on.
Nuisance mode delete can be disabled by the system
administrator.
Changing Priorities Status While Scan is On
While the radio is scanning, the dynamic priority change feature
allows you to temporarily change any channel in a scan list
(except for the Priority-One channel) to the Priority-Two
channel.
This change remains in effect until scan is turned off. Scan then
reverts to the preprogrammed (original) setting.
Procedure:
1
Press the Menu Select button directly below DynP to
change the priority of a non-priority channel in the scan list
to Priority-Two.
2
H
Press
momentarily to exit the scan list and resume
scanning.
Restoring Priorities in a Scan List
Procedure:
To restore the original channel priorities in a scan list, do one of
the following:
•
Turn scan off, then on.
OR
•
Change channels.
OR
•
Turn off the radio, and then turn it back on.
53
English